|
ITEM |
: |
PIC Programmer |
|
MODEL |
: |
CMM-PIC-1 |
The E-KIT96 is designed as a tool to
allow Students and developers to program PIC Micro-controllers. It is a powerful
and flexible system that provides a user friendly environment to carry out a
large variety of programming application tasks. The KIT96 comes complete with
the development programming board, P16PRO Programming Software, 1 sample of PIC
16 Micro-controller chip.
This E-Kit 96 uses the P16PRO software to program
all 8, 18, 28 & 40 pin DIP serial programmed PIC’s. The
P16PRO PIC Programming software for PCs will work under DOS, W3.1 or W95.
The kit is suitable for learning PIC design and programming of various
PIC 16 series. An instruction and experiment manual is
provided to guide the student through step by step instructions.
There are 8 links to add to the board.
The board has 8, 18 and 40 pin IC sockets. However, for maximum flexibility in
programming , it can be added 40 pin wide-slot ZIF socket model 40ZIF.
28 pin PICs programmed by the P16PRO are all skinny 0.3” DIPs. They need the 40
pin ZIF socket. The 14 pin IC socket is used to mount the 74LS05. Connection to
the parallel port of a PC is done by a straight-through male/female cable model
CABLE-1 from the on-board 25 pin PCB-mounted sub D connector.
Additional 64 pin adapter model A64PIN is needed to program the 64
pin PIC’s – 16C92x & 17Cxxx
|
